2-Apr-2025
15 Ton Gantry Crane
Introduction to 15 Ton Gantry Cranes
A 15 ton gantry crane is a heavy-duty lifting solution designed for industrial applications requiring precise handling of massive loads. These robust cranes are essential in:
- Steel fabrication plants
- Shipbuilding yards
- Construction sites
- Mining operations
- Heavy equipment warehouses
This comprehensive guide covers 15 ton gantry crane dimensions, prices, and key purchasing factors to help you make an informed decision.
15 Ton Gantry Crane Dimensions & Specifications
Standard Dimensions Table
| Parameter | Single Girder | Double Girder |
|---|---|---|
| Span | 8-25m (26-82ft) | 10-35m (33-115ft) |
| Lifting Height | 6-18m (20-60ft) | 8-30m (26-100ft) |
| Wheelbase | 3-5m (10-16ft) | 4-8m (13-26ft) |
| Beam Width | 0.8-1.2m (2.6-4ft) | 1.2-2m (4-6.5ft) |
| Leg Height | Adjustable (5-15m) | Fixed/Adjustable |
Key Dimension Considerations
- Workspace Clearance
- Ensure adequate headroom (minimum 1m above highest lift point)
- Check floor load capacity (typically 10-15 tons/m² required)
- Span Requirements
- Measure between support columns/runways
- Wider spans require reinforced girders
- Mobility Options
- Fixed (permanent installation)
- Rail-mounted (precise movement)
- Rubber-tired (mobile applications)
15 Ton Gantry Crane Price & Cost Breakdown (2024)
Price Comparison Table
| Type | Price Range (USD) | Best For |
|---|---|---|
| Manual Push | $18,000-$35,000 | Low-budget operations |
| Single Girder Electric | $35,000-$65,000 | Workshops, factories |
| Double Girder Electric | $55,000-$130,000 | Heavy industry |
| Rubber-Tired (RTG) | $85,000-$220,000 | Ports, container yards |
| Rail-Mounted (RMG) | $110,000-$270,000 | Steel mills, shipbuilding |
Factors Affecting Cost
- Structural Design
- Single girder (25-40% cheaper than double)
- Custom spans (+15-30% cost)
- Power System
- Manual vs. electric (+$20,000-$50,000)
- Automation features (+$15,000-$40,000)
- Additional Features
- Explosion-proof certification (+30-50%)
- Outdoor weather protection (+20-35%)
- Special coatings/paint (+5-15%)
- Installation & Logistics
- Foundation work ($5,000-$25,000)
- Professional installation ($8,000-$30,000)
- Shipping (3-12% of equipment cost)
How to Choose the Right 15 Ton Gantry Crane
1. Determine Your Lifting Requirements
- Maximum load weight (include 25% safety factor)
- Frequency of lifts (continuous vs. intermittent)
- Required precision (standard vs. millimeter-accurate)
2. Evaluate Workspace Constraints
graph TD
A[Workspace Assessment] --> B{Indoor/Outdoor?}
B -->|Indoor| C[Check ceiling height]
B -->|Outdoor| D[Wind/weather considerations]
A --> E[Measure available footprint]
E --> F[Determine fixed/mobile needs]3. Compare Power Options
- Manual: Lowest cost, limited to infrequent use
- Electric: Most common, balance of power & precision
- Hydraulic: High power, best for harsh environments
4. Consider Future Expansion
- Modular designs allow capacity upgrades
- Select slightly larger span than currently needed
- Ensure compatibility with potential automation
Maintenance Cost Estimate
| Service | Frequency | Estimated Annual Cost |
|---|---|---|
| Routine lubrication | Monthly | $500-$1,500 |
| Electrical inspection | Quarterly | $2,000-$5,000 |
| Structural assessment | Yearly | $3,000-$8,000 |
| Wire rope replacement | 3-5 years | $2,500-$6,000 |
Conclusion: Is a 15 Ton Gantry Crane Right for You?
A 15 ton gantry crane represents a significant investment that can transform your material handling capabilities. By considering:
✔ Actual load requirements (not just maximum capacity)
✔ Workspace dimensions (span, height, clearance)
✔ Total cost of ownership (purchase + installation + maintenance)
✔ Supplier reputation (quality certifications, after-sales service)
You’ll ensure optimal performance for years to come.
Ready to get quotes? Contact top suppliers with your exact specifications for accurate pricing comparisons.
